Epson scan-to-SMB

Mon, 01 Jan 0001 00:00:00 +0000

Use this guide for the copier side of scan-to-folder setup. It does not require PrintMaster, Epson Scan 2, or an application running on the receiving PC. A working SMB share is still required.

Start with Scanning & SMB for the receiving-PC setup choices. The brand-neutral copier checklist explains the shared concepts; the Epson-specific field behavior is documented below.

Model and verification scope

Item	Evidence
Device-reported model	ST-C8090 Series
Device-reported firmware	03.97.OJ19PB
Interface	English Epson Web Config, administrator session
Inspection date	October 16, 2026
Inspected directly	Administrator navigation, an empty contact’s SMB editor, field visibility, and scan-default settings
Not performed	Applying a contact, changing saved settings, testing the SMB connection, or sending a document

The screenshots below are real captures of this device’s interface. Contact details are synthetic, entered into an empty slot without selecting Apply; the password is deliberately blank. The filename prefix in the defaults screenshot is also an unsaved example. Captures are cropped to the relevant interface, without the browser address bar, existing contacts, serial number, or network identifiers.

Epson on PrintMaster Docs

Epson scan-to-SMB

Model and verification scope